Municipal water treatment plants need reliable nitrate data at the denitrification stage to optimize carbon dosing and prevent discharge violations. But traditional grab sampling and lab analysis are too slow to catch rapid process shifts. At a 500,000 m³/d municipal…
A full-spectrum water quality sensor measures multiple optical parameters in water using ultraviolet-visible absorption spectroscopy. Unlike reagent-based analyzers, it produces continuous data without chemicals, consumables, or sampling lag. It is used across municipal water treatment, industrial wastewater, and watershed monitoring…
Turbidity Monitoring in Coal Mine Water Coal mine water is fundamentally different from surface water, domestic sewage, or general industrial wastewater. It is dark, heavily loaded with suspended coal fines, and often accompanied by oils, gases, and extreme field conditions.Conventional…
Product overview The iSPS-X Multi-parameter water quality probes is an online measuring instrument integrating pH/ORP, conductivity, TDS, salinity, turbidity, suspended solids, chlorophyll a, cyanobacteria, COD, dissolved oxygen (DO), TOC, nitrite nitrogen, free chlorine, ammonia nitrogen, fluoride, chloride, calcium ions, oil…
Product overview SPS-F full spectrum water quality sensor adopts the measurement principle of UV-Vis absorption spectrum, real-time online monitoring of “light-pattern” information in the wavelength range of 200-800 nm, and multi parameter measurement by AI algorithms, including COD, TOC, DOC,…
The SPS-T-SC1 turbidity/suspended solids (sludge concentration) sensor is aturbidity and suspended solids sensor based on the 90° and backscattered lightmeasurement principle. Mainly used in the fields of surface water, domesticsewage and industrial sewage. The turbidity sensor is equipped with automaticoptical…
Accurate pH measurement is critical for water treatment, environmental monitoring, and industrial process control. Regular calibration ensures your pH sensor maintains its specified accuracy of ±0.1 pH. This guide provides step-by-step calibration instructions for the SPS-pH Water Quality Sensor based…
Choosing the right sensor for your Wastewater Treatment Plant (WWTP) depends almost entirely on what you need the data for (compliance vs. process control) and how quickly you need it. The following guide breaks down the differences between COD, TOC,…
Electrical conductivity is one of the most frequently measured parameters in water quality analysis. It indicates the ability of water to conduct an electric current, which correlates directly with the concentration of dissolved ions such as salts, minerals, and inorganic…
Teneurs en chlore sûres de l'eau potable : Ce qu'il faut savoir Le chlore est l'un des désinfectants les plus utilisés dans les réseaux publics de distribution d'eau à travers le monde. Il joue un rôle essentiel dans la protection des communautés contre les maladies d'origine hydrique. Mais quelle est la quantité de chlore...
