Notre emplacement
304 North Cardinal St.
Centre de Dorchester, MA 02124
SPS-ORP Water Quality Sensor
The water quality sensor (redox potential sensor) adopts the electrode principle, can measure the redox potential, and can react to the water samples’ redox strength; the sensor is widely used in water, pipe networks, medical sewage, and other fields and can provide customers with accurate and efficient monitoring.
Parameter: ORP, Temperature
- Electrodynamic measurement, no pollution, friendly to the environment
- Quick measurement: the shortest measurement cycle is 1 second
- RS485 communication mode can quickly connect to the meter controller, control the sensor
- IP68 protection grade can be used in harsh environments
- Low power consumption, can be powered by battery, convenient for equipment deployment
Spécifications
| Objet | Spécifications |
|---|---|
| Principe | Glass electrode method |
| Dimension | φ25×226mm |
| Exigences en matière d'alimentation | DC+12V~+24V |
| Température de fonctionnement | 2 à 50℃ |
| Pression | 1 bar |
| Installation | Submergée, à écoulement continu |
| Débit de l'échantillon | 200-500mL/min |
| Communication | RS485(Modbus RTU), Bluethood |
Paramètres
| Paramètres | Numéro de modèle | Gamme | Résolution | Précision （Standard solution） |
|---|---|---|---|---|
| ORP | SPS-ORP | -1500 mV – +1500 mV | 1 mV | ±20 mV |
| Température | SPS-ORP | 0-50 °C | 0.1 °C | ± 1 °C |
Application
Rural Sewage Treatment Station
The central control system timely controls the time required for each reaction stage through data fed back by sensors, greatly improving the efficiency of sewage treatment facilities.
